Spec Sheet

For More Information
Contact your Zebra representative for additional printer
specifications. For information on Zebra’s other printers,
supplies, software and accessories, ask your reseller, call
[phone], or visit our Web site www.rfid.zebra.com.
Auto calibration—printer calibrates when
printer is turned on or when printhead is
closed with approximately two labels
Early Warning Systems for low label, low
ribbon, and clean printhead alerts
PRINTER SPECIFICATIONS
Memory
Standard 16 MB SDRAM (12 MB available for
user); 4 MB Flash (2.0 available to user)
Optional: PCMCIA or CompactFlash
®
(up to
256 MB memory each)
Print length
Maximum non-continuous: 39” (991 mm) with
standard memory
Media Sensors
Dual media sensors: transmissive and
reflective
MEDIA CHARACTERISTICS
–
SMART LABELS
Maximum label and liner length
39”/991 mm with standard memory
Maximum roll outside diameter
8.0” (203 mm)
Core diameter
3” (76 mm) core
Media thickness
.003” (.076 mm) to .0012” (.305 mm)
Media types
Continuous, die-cut, black mark
For optimum print quality and performance,
use Genuine Zebra Supplies
RIBBON CHARACTERISTICS
Outside diameter
3.2” (81.3 mm)
Standard length
1476’ (450 m) or 984’ (300 m); provides
3:1 & 2:1 media roll to ribbon ratios
Ratio
Ribbon is recommended to be at least as
wide as media.
STANDARD FEATURES
Fully integrated ThingMagic
®
UHF RFID
reader/encoder for transponder types:
EPC Class 1
EPC Class 0
Matrics’ 0+
ISO18000-06B
EPC “Gen2” via firmware update
RFID processes optimized for fastest label
throughput
New RFID ZPL
®
commands allow ease of
RFID set up with maximum flexibility
Program position allows users to place
transponders virtually anywhere within a
smart label
RFID calibration feature automatically selects
the program position for optimal transpon-
der placement
RFID counters keep track of the good and
unusable labels
Variable RFID power settings for both read
and write allows maximum flexibility for
printing small labels
Full function front panel and multilingual back-
lit LCD display with user-programmable
password protection
ZebraLink, WebView, (requires optional
ZebraNet PrintServer II) and Alert (requires
optional ZebraNet PrintServer II)
Thin film printhead with E
3®
Element Energy
Control
Thermal transfer and thermal direct printing of
bar codes, text, and graphics
XML-enabled printing
32 bit 133 MHz RISC processor
Type I, II linear memory up to 32 MB and
future availability of Type III Series PC Card
Interface
Clear media side door—easy monitoring of
supplies usage without opening the printer
systems
Zebra printer driver for Windows
®
3.X and
95/98/NT/2000 operating systems
Internal real-time clock
Advanced label/media counters
Ribbon setup
Ribbon wound coated side out
Core I.D.
1.0” (25.4 mm)
OPERATING CHARACTERISTICS
Environmental
Operating temperature:
Thermal transfer = 41º F/5º C to 104º F/40º C
Thermal direct = 32º F/0º C to 104º F/40º C
Storage temperature: -40º F/-40º C to
140º F/60º C
Operating humidity: 20% to 85%
non-condensing R.H.
Storage humidity: 5% to 85%
non-condensing R.H.
Electrical
Universal power supply with power-factor
correction 90-264 VAC, 48-62 Hz
Agency approvals
Bi-National UL 60950 3rd edition/CSA
CAN/CSA-C22.2 No. 60950-00 Third Edition;
FCC Part 15.107 & 15.109 Class B; FCC Part
15.247; Canadian ICES-003, Class B;
IC RSS-210
RELATED PRODUCTS
Options and Accessories
ZebraNet PrintServer II
ZebraNet 10/100 Print Server
ZebraNet Wireless Print Server
Additional fonts
RS-422/485 multi-drop (optional adaptor)
Applicator interface
IBM
®
twinax interface
IBM coax interface
BAR-ONE
®
software
Media supply spindle
(continued)
R110Xi / R170Xi
Specifications at a Glance*