User manual

Summary of Firmware Release
V68.19.7Z
2
P1040502-017 03/24/2014
• The setting may be changed via the COMMAND LANGUAGE menu in the
LANGUAGES menu on the QLn420 and QLn HC series units. The default password is
"1234".
• An alternate Plug and Play string for EPL has been added.
• Added support for Bluetooth® connectivity to iOS™ devices.
• This applies to printers with SKU designators Qxx-xxNxxMxx-xx and
Qxx-xxCxxMxx-xx that are loaded with V68.19.7Z or later.
• Control panel menu changes:
• MFI CAPABILITY added to the Bluetooth menu.
• WLAN STATUS added to the QLn420 and QL HC Network menu.
• AP MAC ADDRESS added to the QLn420 and QL HC Network menu.
• COMMAND LANGUAGE added to the QLn420 and QL HC Language menu.
• BACKLIGHT TIMEOUT in the QLn420 and QL HC Tools menu is now password
protected. The default password is "1234".
• MEDIA TYPE in the QLn420 and QLn HC Settings menu is now modifiable and
password protected. The default password is "1234".
• SetGetDo commands added to control passwords on QLn420 and QLn HC series
printers
• Bluetooth Pairing QR code:
Press the arrow up key from the printer’s home screen to display a QR code
containing the printers Bluetooth MAC address.
• IP Address Pairing QR code:
Press the arrow up key from the printer’s home screen to display a QR code
containing the printers IP address.
• The two key config report now includes a line that begins with PCC and ends with the
stock keeping unit (SKU) number of the printer as assigned at the point of
manufacture.
• Syslog support added.
• The following SetGetDo commands were added or updated:
device.syslog.enable Enables the syslog file to record system
messages.
Choices: off, on
Default: off
device.syslog.configuration Specifies the location for the syslog
reports to be recorded.
device.syslog.save_local_file Saves the contents of the local syslog to
E:SYSLOG.TXT.,
Choices: no, yes
Default: no
device.syslog.log_max_file_size Specifies the maximum size of the
syslog file.
Choices: 10000-400000
Default: 10000
device.syslog.entries Displays the contents of the local syslog
file.