User guide

80
QLn Series User Guide
Appendix D (continued)
IDLE DISPLAY
FW VERSION
POWER UP ACTION
NO MOTION
HEAD CLOSE ACTION
FEED
DIAGNOSTIC MODE
ENABLED
Select the information shown on the
printer’s display when the printer is idle.
Set the action for the printer to take dur-
ing the power-up sequence, i.e. no motion,
calibrate, etc.
Set the action for the printer to take
when you close the printhead, i.e. feed, cal-
ibrate, etc.
Use this diagnostic tool to cause the
printer to output the hexadecimal values
for all data received by the printer.
This menu item indicates if the Zebra
Basic Interpreter (ZBI 2.0
TM
.) option is en-
abled on your printer.
ZBI ENABLED?
NO