User guide

QLn Series User Guide

Loading Media in Peel-o Mode (QLn420)

• If you plan to use the printer in the peel-off mode, peel a

few labels off of the media and load the media as previ-

ously described.

• Close the media cover.

• Lift up on the peeler lever located on the side of the print-

er below the media cover button.

• Lock the peeler lever in the “up” position to fully engage

the peeler bail.

Figure 16: Activating Peeler Bar (QLn420 Shown)

• Turn on the printer or press the Feed button on the front

of the printer if the printer is already on. The printer will

advance the media to the next label, if printing labels.

If you are printing on journal media, the printer will ad-

vance a short strip of media.

Note: Peeler will not work with most synthetic label stock since that

media is softer and tends to adhere to its liner. However, the QLn420

printer is fully capable of printing on synthetic labels.

Peeler Bail

Peeler Lever

Media Cover

Button

Peeler

Release