User manual

Summary of Firmware Release

V68.18.3Z

05/09/2013 P1040502-015

Auto-Recovery

A new Auto-Recovery feature has been added that will reinstall the firmware if an issue is

detected during start up. If a problem is detected the printer will display “Decompressing

Files”, then “Writing Files to Flash” and then “Finishing Install” on the LCD, after which the

printer will restart. The firmware version on the printer will remain the same after Auto-

Recovery.

V68.18.3Z

Release Date: 10 September 2012

Enhancements

• Add support for 802.11 n radio for EU/EFTA countries, SKU QNx-xxNxExxx-xx

• Ability to print Aztec barcode with Bluetooth mac address from LCD

• Add support for Wavelink Avalanche (over Ethernet or WLAN)

• CPCL: Add support for ESC-JRU command

• Mirror: Add ability to show progress during mirror updates

• Mirror: Add support for a common application directory (see below)

• Mirror: Improved download performance

• Mirror: Increase maximum number of download files from 100 to 300

• Increase the max top of form setting from 89 to 120 for the QLn320 (see below)

• SGD: Change default value of the usb.halt parameter from yes to no

• SGD: Added new parameter media.feed_skip (see below)

• Updated Bluetooth Stack to version 4.2.0

Issues Corrected

• CPCL: PRESENT-AT not performed on ! U1 FORM

• CPCL: 4 dot row registration error when using black bar media (see below)

• CPCL: PRESENT-AT not undone for first label after a power on

• DUMP mode not working correctly

• LCD: battery icon may falsely display fully charged status during startup

• PRINT: skipping labels with ½ inch (12 mm) label stock

• PRINT: first label printed is not registered correctly

Note • Data sent to the printer during Auto-Recovery may not be received or processed.