User`s guide

Zebra Mobile Printers • Wireless Configuration Guide • rev. H 9
QL320 WLANTCP
IP: 10.14.86
ESSID: ZEBRA_MKTG
PORT: 6101 MORE BACK
ing place. You may then exit the wizard by clicking on the “Finish”
button.
Verifying Communications
If your printer is equipped with a display, you can verify that the
printer has established communication with the Access Point. The
antenna symbol on the upper left hand side corner of the LCD will
be shown.
You can scroll the screens of the printer LCD until you get to the
WLAN TCP-IP screen. The IP address and the ESSID of the Access
Point will be shown. If the printer is not associated with a network
radio access point, the antenna icon will be missing and the ESSID
field will be blank.
If your printer does not have an LCD the “Power” LED will blink if
the printer is not associated with an access point.
continued
Antenna Icon Scroll Button
Power Button
A rapidly blinking
indicator means radio
communications with a host
is taking place
A blinking power LED indicates that the
printer is not linked to an access point on
the network, or the printer’s battery needs
re-charging
QL Series Keypad
QL and RW Series Keypad with LCD
Feed Button
Power Button
Feed Button
Select Button