User`s guide

Zebra Mobile Printers • Wireless Configuration Guide • rev. H 49
it in a temporary folder. Rename the certificate file as shown
below. The file name is not case sensitive.
FreeRADIUS.net-Root.crt -> CacertSv.nrd
NOTE: Certificate files are normally generated by a trusted
3
rd
-party Certificate Authority (CA). If you are using different
certificate files from the example above the TTLS section of the
“Eap.conf “ file will need to be edited to reference the appropri
-
ate files. The root certificate file and client certificate files must
also be renamed as above and saved to the printer’s file system.
To configure a Zebra mobile printer we will use Zebra’s Label
Vista utility and a communications application such as Hyper-
Terminal.
Label Vista can be downloaded from
http://www.zebra.com
.
You will also need a serial communications cable to connect
your computer and the mobile printer. Refer to the following
table:
Model Serial Cable p/n
QL 220 Plus
BL16555-1 or
BL17757-000
QL 320 Plus
QL 420 Plus
RW 220
BL17205-1
RW 420
Connect the printer serially to a PC and run Label Vista. Match
the com port setting to the printer (refer to the printer’s 2-key
self test for settings) using Printer/Com Port Setup. Send the
“CacertSv.nrd” file by selecting Printer/Send File and make sure
to check off the “Store to flash file system” option.
continued