User`s guide

Zebra Mobile Printers • Wireless Conﬁguration Guide • rev. H 46

CONFIGURING THE PRINTER FOR WPA EAP-TLS AUTHENTICATION

Conﬁgure the Zebra mobile printer for WPA EAP-TLS authenti-

cation type by typing the following command strings. Terminate

them with carriage returns. The ﬁelds in blue will be unique to your

network and printer.

If you previously conﬁgured your printer for standard EAP-TLS,

only the lines in red need to be typed in:

! U1 setvar “wlan.essid” “MyESSID”

! U1 setvar “wlan.wpa.authentication” “eap-tls”

If your private key certiﬁcate is not password protected, type:

! U1 setvar “wlan.8021x.eap.privkey_password” “”

Or if your private key certiﬁcate is password protected, type:

! U 1 s e t v a r “ w l a n . 8 0 2 1 x . e a p . p r i v k e y _ p a s s w o r d ”

“MyCertPassword”

Then type the ﬁnal line:

! U1 setvar “wlan.wpa.enable” “on”

At this point you are done with the conﬁguration of the printer.

Turn the printer off and then back on to initialize all the settings

for the radio. If your printer has an LCD display you should see the

security connection messages for a couple of seconds prior to the

regular menu appearing.