User`s guide

Zebra Mobile Printers • Wireless Configuration Guide • rev. H 37
Sets the device’s MSP Network Management Device FTP
Server user password to “junk”.
netmanage.msp.interval
Type: getvar, setvar
This parameter sets or retreives the MSP Network Manage-
ment Update Interval time in seconds.
getvar example: ! U1 GETVAR “netmanage.msp.interval”
This example retrieves the device’s MSP Network Management
Update Interval time setting.
setvar example:
! U1 SETVAR “netmanage.msp.interval” “300”
This example sets the device’s MSP Network Management
Update Interval to 300 seconds
netmanage.msp.startup_update_enable
type: getvar, setvar
This parameter sets and gets MSP Network Management Start
Up Update enable setting.
getvar example:
! U1 GETVAR “netmanage.msp.startup_update_enable”
Returns the current MSP Network Management Start Up Up-
date enable setting stored in the printer.
setvar example:
! U1 SETVAR “netmanage.msp.startup_update_enable” “on”
Sets the device’s MSP Network Management Start Up Update
enable setting to “on”. Setvar options are either “on” or“off”
netmanage.msp.interval_update_enable
type: getvar, setvar
This parameter sets and gets MSP Network Management
Interval Update enable setting.
getvar example:
! U1 GETVAR “netmanage.msp.interval_update_enable”
Returns the current MSP Network Management Interval Up-
date enable setting stored in the printer.
setvar example:
! U1 SETVAR “netmanage.msp.interval_update_enable” “on”
This example sets the device’s MSP Network Management
Interval Update enable setting to “on”. Setvar options are
either “on” or“off”
netmanage.msp.ftp_path
type: getvar, setvar
This parameter sets and gets MSP Network Management FTP
Server Path.
getvar example: ! U1 GETVAR “netmanage.msp.ftp_path”
Returns the current MSP Network Management FTP Server
path stored in the printer.
setvar example:
! U1 SETVAR “netmanage.msp.ftp_password” “WNMS”
This example sets the device’s MSP Network Management
Device FTP Server path to “WNMS”.