User`s guide

Zebra Mobile Printers • Wireless Configuration Guide • rev. H 32
Click on the Wavelink Avalanche tab and set the resulting
fields as follows:
Model Name= printer’s model number (e.g. QL320)
Encryption = none
Update Interval = 90000 = 90 seconds
UDP Timeout = default setting: 0
TCP Connect Timeout = default setting: 0
User Name = Not supported in this version of Label Vista.
Typically not used, unless required by your Avalanche
network configuration.
Password = Not supported in this version of Label Vista.
Typically not used, unless required by your Avalanche
network configuration.
Remote Agent IP Address = IP address of the server that
is running the Avalanche Agent application.
Available Agent IP Address = default setting: 0.0.0.0
Set the check boxes :
Update on Startup = if checked enables Avalanche to
check for updates at startup.
Update at Interval = if checked: enables Avalanche to
check for updates at the interval determind by the Update
Interval setting.
Turn the printer OFF.
The above settings will make the printer perform an update
upon start-up and every 90 seconds thereafter.
Verify Printer Registration & Properties
• Turn the printer ON.
The Printer will acquire an IP address and the first Ava-
lanche Update should occur.
• Using the Avalanche Console Manager, verify that a new
device entry, corresponding to network printer, has suc-
cessfully been created.
• Right click on the new device entry and select Client Set-
tings. The dialog box will appear with Ping Client, Send
continued
Text Message and Update Now buttons on a fist tab. The
second tab of the dialog box contains printer properties.
• Properties can be added, changed and deleted. Each of
the above operations require selecting the Update Now
action.
Setting Avalanche Parameters with the Printer
QL320
90000
0
0
0 0 0 0