User`s guide

Zebra Mobile Printers • Wireless Configuration Guide • rev. H 13
continued
POP 3 (POST OFFICE PROTOCOL 3) SETUP
POP 3 (Post Office Protocol 3) is usually used to retrieve e-mail
from a mail server, but it can also be used for sending print jobs to
a wireless mobile network printer. The printer should already be
configured for wireless operation and associated with an access
point before running the POP3 setup wizard. (See the previous two
sections).
• Open Label Vista. In the top menu bar select Printer / Network
Setup / POP3 Setup.
• The POP3 window will come up, and present a list of informa
-
tion you will need to continue. Remember that the printer should
already be associated with an access point in order to proceed.
Contact your network administrator if you don’t know the informa-
tion requested.
• Enter the POP3 Server IP address and click “next”. (Contact
your network administrator to obtain this address).
• Next, you will need to enter the User Name and Password for
the e-mail account being used. Click “Next”.
• You must now enter the frequency (in seconds) the printer will
check the POP3 account for new mail. Note that the recommended
frequency should be set to greater than thirty seconds to avoid
printer unresponsiveness. Click on “Next”.
• Select the POP3 desired options as shown in the last window.
If the “Print Body of E-Mails” option is selected, the printer will
print messages as they are received. E-mail messages sent to the
printer should be in ASCII text.
If you send an e-mail message to the printer that can be inter-
preted as a CPCL command, the printer will attempt to execute
that command.
Select POP3 network-
ing option & enter
the POP3 Server IP
address
Enter the POP3 User
name and password
Enter how often the
printer will query the
POP3 server.