User`s guide

Zebra Mobile Printers • Wireless Configuration Guide • rev. H 12
AUTHENTICATION SETTINGS
If you have a printer with a Cisco 802.11b/Symbol 802.11b radio
and your network supports either the LEAP or Kerberos security,
you can set authentication with Label Vista by doing the following:
In Label Vista’s top menu click on Printer and select Network Set
-
tings from the drop down menu. Click on the “Authentication” tab
and then check the box next to either LEAP or Kerberos depending
on your authentication system. Enter the appropriate authentica-
tion information you recorded in Table 1. (See picture opposite).
Contact your network administrator if you don’t know the required
authentication information.
NOTE: If you have an 802.11 FH (Frequency Hopping) radio installed,
LEAP and Kerberos authentication are not available.
continued