User`s guide

Zebra Mobile Printers • Wireless Configuration Guide • rev. H 11
NETWORK SETUP WITH ENCRYPTION
• As was described in Quick Network Setup, open Label Vista and
click on “Printer” on the top menu. From the drop down menu go to
Network Setup and select Network Setup with Encryption. Follow
the wizard steps by clicking Next and by entering the information
from Table 1 as it was done in the Quick Network Setup.
If you don’t know some of the requested information, contact your
network administrator.
• Continue the setup by following the wizard windows. Just as in
the Quick Network Setup you must:
• Enter the network port
• Enable the applicable network protocols. Consult with your net-
work administrator to find out which protocols you want to enable.
Note that if your printer has a Frequency Hopping (FHSS) radio
installed you can only use 40 bit encryption.
• Test the settings and click “Finish” to end the wizard and finish
the setup procedure.
continued