User`s guide

Zebra Mobile Printers • Wireless Configuration Guide • rev. H 10
Printing a Configuration Label
If your printer does not have an LCD you can print a Configuration
Label (2-key report) and verify the network settings in the printer.
To print out a Configuration Label follow these steps:
1. Turn the printer off. Load the media compartment with journal
media (media with no black bars printed on the back)
2. Press and hold the Feed Button.
3. Press and release the Power button and keep the Feed button
pressed. When printing starts, release the Feed button.
The printer will generate a configuration label as shown opposite.
continued
The IP Address was
automatically as
-
signed by DHCP
This printer has a
Cisco 802.11b radio
ESSID setup was
successful and this
printer is associated
to the Access Point
A “? “ value for the
Bluetooth .local _
name and .address
parameters indicates
no Bluetooth radio is
installed.