User guide

PAGE 7 OF 18 0813 IH-2551
π
1-800-295-5510
Introduction
Getting Started
Using the
Printer
Troubleshooting
Accessories
Contact Us
Connect the Printer
Connect The Printer With a Cable
You can connect your printer to a terminal or a PC us -
ing either RS232C or USB protocols. Refer to the Label
Vista™ application available on the QL product CD or at
www.zebra.com/software for help on setting up communi-
cations with your printer.
Cable Communications with a Terminal.
Cable Communications with a P.C.
If you are using a USB cable to connect to a PC you
may need to install the Zebra Universal Driver available
at:
www.zebra.com/dri vers.
Communications
Port
RS232C or USB
Communications Cable to
Terminal
Refer to Appendix A in the QL Plus
User Guide for part numbers.
Terminal
RS-232C or USB Communications
Cable to Computer
Refer to Appendix A in the User Guide
for part numbers.
USB
Connector
RS232
Connector
QL Plus Series Quick Start Guide