User guide

66
QL Plus Series User Guide
Specifications
Note.- Printer specications are subject to change without notice.
Printing Specications
Pa
Parameter QL 220 Plus QL 320 Plus QL 420 Plus
Print Width
Up to 1.89 in.
(48 mm)
Up to 2.9 in.
(71.2 mm)
Up to 4.09 in.
(103.8 mm)
Print Speed
3 in./second
(76.2 mm/second)
4 in./second
(101.6 mm/second)
3 in./second
(76.2 mm/second)
Distance from Print
Element to Top of
Form
0.445 in. (11.3 mm)
89 dots
0.571 in. (14.5 mm)
116 dots
0.571 in. (14.5
mm) 116 dots
Print Head Life,
calculated
1,964,160 in. (50 Km) nominal
Print Density 203 dots/inch (8 dots/mm)
Memory and Communications Specications
Flash Memory 4 MB or 8 MB flash
1
RAM Memory 8 MB or 16 MB RAM
1
Standard
Communications
RS-232 serial port (8 Pin circular DIN
connector)
Configurable Baud rate (from 9600 to 57.6
Kbps), parity and data bits.
Software (X-ON/X-OFF) or hardware (DTR/
STR) communication handshake protocols.
USB 2.0 Full Speed Interface (12 Mbps)
Optional Wireless
Communications
Infrared wireless link meets IrDA 1.1
communications specifications: 2,400 to
115,200 Baud rate
2
Bluetooth compatible 2.4 GHz SRRF link
Optional wireless LAN capabilities comply
with802.11b/g protocols
Real Time Clock (RTC)
Time and date under application control.
Refer to CPCL Programming Manual, available
at www.zebra.com/manuals for RTC commands.
1. Memory configuration on your printer may be ascertained by printing a
configuration label as detailed on pages 64-68.
2. IrDA communications available only on units configured with Flash/RAM
memory configuration of 4MB/8MB.