User guide
37
QL Plus Series User Guide
Important Notice:
This device is a portable RF printer
intended for commercial and industrial
use in all EU and EFTA member states.
Radio Regulatory Information
Zebra Bluetooth Radio QL+ZBR3
NOTE: The ZBR3 Bluetooth radio option will gradually be replaced
by the Zebra Embedded Bluetooth 2.0 Radio. This radio oers more
Bluetooth functionality and is completely backwards compatible with
any installations currently using the QL+ ZBR3 radio. The wireless
options installed on your printer may be determined by printing a
conguration label as detailed on pages 64-68.
Caution • Exposure to Radio Frequency Radiation. The radiated output
power of this internal Bluetooth radio is far below the FCC radio
frequency exposure limits. The internal Bluetooth radio operates
within guidelines found in radio frequency safety standards and
recommendations. Do not use the printer in an unauthorized manner.
Note • The following section only applies when the QL+ZBR3
(FCC ID: I28MD-BTC2TY4) Bluetooth Radio is installed in a QL Plus
series printer. Unless specied elsewhere in this manual, the antenna
used for this transmitter must not be co-located or must not operate in
conjunction with any other antenna.
European Regulatory Information for this Radio
This device is intended for use in all EU and EFTA member states.
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive
1999/5/EC. The following test methods have been applied in order to prove
presumption of compliance with the R&TTE Directive 1999/5/EC:
• EN55022
European Immunity Standard
• EN 60950-1
Safety of Information Technology Equipment
• EN 300 328-2 V1.4.1
Technical requirements for spread-spectrum radio equipment
• EN 301 489-1/-17 V1.5.1/1.2.1 -17 v1.2.1
EMC requirements for spread-spectrum radio equipment.
This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and
office use in all EU and EFTA member states.