Specifications

0DLQWHQDQFH 6HFWLRQ
Figure 4-13. Remove Ribbon Sensor Board
Figure 4-14. Install Ribbon Sensor Board
Tab
Ribbon Sensor Board
1. Slide a 1/4 in.(6.4 mm) flat-blade
screwdriver under the tab
(about 1/4 in.)(6.4 mm).
2. Gently lift up on the screwdriver
handle until the screwdriver is
perpendicular to the printhead
assembly and ribbon sensor board.
3. The ribbon sensor board
away from the printhead assembly.
slides
Tab
Cutout
Ribbon Sensor Board