Specifications

2SHUDWLRQ2YHUYLHZ 6HFWLRQ
/RDG5LEERQ
1. Lift the printhead until you feel it lock in place.
2. Hold the ribbon cartridge as shown in Figure 2-13. The placement arrows should be
visible and pointing toward the rear of the printer.
3. Install the ribbon cartridge onto the printhead. The portion of the cartridge with the
white gear should be placed over the printhead.
4. Refer to Figure 2-14. The ribbon cartridge automatically slides into the correct
operating position.
5. Refer to Figure 2-15. Close the printhead and the top cover.
6. Refer to Figure 2-10 for Tear-Off or Figure 2-12 for Peel-Off. Swing the media
access door up, ensuring the media is properly extended.
7. Lift to hook the top of the media access door over the top cover.
8. Push in the bottom of the media access door to close.
9. Turn the printer On (O) or press FEED if the printer is already on.
Figure 2-13. Insert Ribbon Cartridge
1RWH7RUHPRYHWKHULEERQFDUWULGJHUHYHUVHWKHDERYHSURFHGXUHV
Ribbon
Cartridge
White
Gear
Printhead
Arrows