Specifications

6HFWLRQ 2SHUDWLRQ2YHUYLHZ
Refer to Figure 2-11. The tear blade should be stored on the inside of the media access
door. With the lip of the tear blade facing the inside of the door, place the notches of the
tear blade over the tabs on the door. Press and slide the tear blade toward the hinged end.
Lift the tab to allow the tear blade to slip past the protrusion and lock in place.
10. Close the printhead and the top cover.
11. Swing up the media access door, ensuring that the media liner is threaded through
the bottom slot in the media access door.
12. Lift to hook the top of the media access door over the top cover.
13. Push in the bottom of the media access door to close.
Figure 2-11. Store Tear Blade
Figure 2-12. Thread Liner Peel-Off Mode
Tear Blade
Notch
Tear Blade
Notch
Door
Tab
Door
Tab
Label
Bottom Slot
Liner