Specifications
2SHUDWLRQ2YHUYLHZ 6HFWLRQ
&KDUJH%DWWHU\
Refer to Figure 2-4.
9$&%DWWHU\&KDUJHU
1. With the battery installed in the printer, insert the connector of the battery charger
into the receptacle on the side of the printer.
2. Plug the transformer into an appropriate 120 VAC electrical outlet.
3. The battery charging LED briefly flashes and then stays on. When the battery is
fully charged, the LED goes off. It takes approximately one hour for the standard
battery and two hours for the extended life battery to charge.
4. You may leave the battery charger connected to the printer after the battery has
charged to apply a continuous maintenance charge.
8QLYHUVDO%DWWHU\&KDUJHU
1. With the battery installed in the printer, insert the battery charger connector into the
receptacle on the side of the printer.
2. Ensure the supplied power cord is inserted into the battery charger.
3. Plug in the other end of the power cord into the appropriate AC electrical outlet.
4. The battery charging LED briefly flashes and then stays on. When the battery is
fully charged, the LED goes off. It takes approximately one hour for the standard
battery and two hours for the extended life battery to charge.
5. You may leave the battery charger connected to the printer after the battery has
charged to apply a continuous maintenance charge.
1RWH&RPSOHWHO\GLVFKDUJHWKHEDWWHU\EHIRUHUHFKDUJLQJ:DLWXQWLODEDWWHU\XQGHU
YROWDJH²OHYHOLQGLFDWLRQ(UURU/('LVRIIDQG3RZHU/('LVIODVKLQJH[LVWVEHIRUH
UHFKDUJLQJ