User guide

Getting Started

Defaulting the printer

45537L-004 Rev. A ZebraNet PrintServer II User Guide 4/19/07

Test Button

To default the printer to factory settings using the Test button, complete these

steps:

1. The printer is turned off (O).

The

Test button is a small hole on the bottom of the external printer device. To press the

Test button, you need to insert something small into the hole, like a paperclip.

2. With the printer turned off, press and hold the Test button on the printer device and turn on

the printer.

3. The status indicator tells you when printer has been reset to factory defaults, as follows:

• If an active network cable is connected to the printer, the status indicator turns solid

green. When this happens, you can release the

Test button.

• If there is not an active network cable connected to the printer, the status indicator

flashes green. When this happens, you can release the

Test button.

• For more details on status indicators, see Status Indicator on page 124.