User guide

Getting Started
Setting Alerts
48
45537L-004 Rev. A ZebraNet PrintServer II User Guide 4/19/07
ZebraLink
In this section are step-by-step instructions on how to set up an alert using ZebraLink. For
information on setting up alerts using ZebraNet View, see ZebraNet View on page 52.
To view Alert Setup using ZebraLink, complete these steps:
1. Open a Web browser.
2. In the Address text-box, type your printer’s IP address, and press Enter.
3. From the Printer Home Page, click Alert Setup.
The Alert Messaging System dialog opens:
To add an alert, you need the default user ID and password.
4. To add an alert, click Add Alert Message.
Important • If you do not have a ZebraLink-enabled printer, these steps will not work.