User`s manual

Settings and Adjustments
Printer Properties
980541-003 Rev. A P630i, P640i Card Printer User’s Manual 55
Ports
Specifies the computer port to which the
P630i or P640i is connected. This will have
been established at the initial installation of
the printer, and will not normally require
attention.
An exception to this is if you wish to use
“printer pooling”, the ability to distribute
print jobs to multiple printers. To enable
printer pooling, check the “Enable Printer
Pooling” box, then check multiple ports.
Each port should have a single Zebra printer
installed on it, and all printers should be
configured identically (for example: all with
YMC front, K back). Now, when you print to
the “main printer” (that is, whichever printer
you right-clicked in Printers and Faxes to get
to this screen), this printer will get print jobs
until it has buffered as many jobs as it can
take. Remaining jobs will then “spill over” to
other printers until all printers in the pool are
busy.
Advanced
Determines the spooling (queuing) of print
jobs, and how spooled jobs are handled
relative to the most recent job. Printing
Defaults allows the system administrator to
establish default settings such as print
quality.