User`s manual

44 P630i, P640i Card Printer User’s Manual 980541-003 Rev. A
Printer Driver Installation
Installing the Printer Driver (Ethernet)
Step 7. Any Zebra printers will be located. Select (highlight) the desired printer (for this
procedure it is a P640i, but the steps would be the same for a P630i) and click the
OK button.
Step 8. The Configure Ethernet Port screen will reappear, but now the information for the
P640i printer selected in step 7 will be displayed.
Then click OK.
Note • If the Printer is not found, check to make sure the Printer is powered on and the
Ethernet connector is engaged. Also, the Ethernet Network must be configured correctly, with
the Printer and the host computer on the same subnet mask. If you are not sure how to verify
this or change the configuration, consult someone knowledgeable on Ethernet Networks.