User`s manual

Printer Driver Installation
Installing the Printer Driver (Ethernet)
980541-003 Rev. A P630i, P640i Card Printer User’s Manual 41
Installing the Printer Driver (Ethernet)
Note • To install the USB driver, see the procedure starting on page 32.
Important • The Ethernet Network must be configured correctly, with the Printer and the host
computer on the same subnet mask. If you are not sure how to verify this or change the
configuration, consult someone knowledgeable on Ethernet Networks.
Step 1. Connect the printer power and connect the Ethernet Port on the rear of the printer to
an Ethernet Network Port. Turn the Printer on and let it initialize until the READY
LED on the front panel is lit.
Step 2. Insert the User Documentation, Drivers, and Training CD into the CD drive of the
host computer. The Select Language window will open.
Step 3. From the Select Language window, click on the appropriate language for your
system. The Main Menu will open in the selected language (English shown below).