User`s manual

Installation
Installation Procedure
980541-003 Rev. A P630i, P640i Card Printer User’s Manual 23
These are shown in the following figure.
Step 1. Remove the Laminate Edge Guide from its “storage location” on the Laminator
Frame (it snaps out).
Step 2. For 1.3 in (33 mm) laminate for use with magnetic stripe cards, snap the Laminate
Edge Guide into the inner hole-and-slot in the lower cassette, as shown in the
following pictures. For 1.66 in (42 mm) laminate for use with signature-stripe cards,
use the outer hole-and-slot.
BACK OF CARD
BACK OF CARD
OF
OF
F
OF
FC
F C
2“
1.3”
1.66“
Laminate
Edge
Guide