User`s manual

Installation
Installation Procedure
980541-003 Rev. A P630i, P640i Card Printer User’s Manual 21
.
Step 3. Pull out an inch or two of laminate past the lip of the cassette.
Step 4. Close the cassette by firmly pressing the “clamshell” together. You will hear a click
and feel a detent when the halves of the cassette seat together.
Step 5. Pull out a little more laminate between the lips of the cassette. If it suddenly stops,
resisting further pulling, a spring detent on the cassette has probably snagged a notch
on the end of the core. This means that the core was installed the wrong way. Open
the cassette and re-install the laminate.
Step 6. If the exposed end of the laminate is uneven or crinkled, cut it as square as you can
with scissors.
Upper Cassette
(Used on Both P630i and P640i)
White Roller Up
White Roller Down
Notched End of
Spool to Right
Notched End of
Spool to Left
Laminate Unrolls
Over Spool
Laminate Unrolls
Under Spool
Lower Cassette
(Used on P640i Only)