User`s manual

20 P630i, P640i Card Printer User’s Manual 980541-003 Rev. A
Installation
Installation Procedure
Step 4. If there is an empty laminate core in the Cassette, remove it.
Loading the Laminate Cassette(s)
uently
Important • If you are using partial-width laminate in the Lower Cassette of a P640i Printer,
read the following section, Using Partial-Width Laminate, before proceeding with this
procedure. (Partial-width laminates are frequently used on the bottom surface of cards that
have a signature panel or a magnetic stripe.)
Important • The Upper and Lower Laminate Cassettes (the lower one only used on the P640i
Printer; the upper one used on both printers) are loaded differently, even though the Cassettes
appear virtually the same.
Note • Handle the laminate by the ends of the spools only to avoid contaminating the
laminate.
Step 1. Remove the new roll of laminate from its packaging.
Step 2. Carefully following the guidelines in the following figure, place the laminate in the
Cassette.