User`s manual

Installation

Installation Procedure

980541-003 Rev. A P630i, P640i Card Printer User’s Manual 19

Step 2. Temporarily remove the corresponding Transfer Guide to be sure there are no scraps

of laminate remaining. If there are any, remove them. Then slide the Transfer Guide

back in until it is held in place by the Retaining Clip.

Step 3. Open the Cassette, like a clam shell, by separating its two halves. Grasp the two

halves firmly with your fingers, then pull it apart. Do NOT use tools. (Upper

Cassette shown.)

Caution • If you feel resistance when removing the cassette, the laminate has likely run

out, leaving one end attached to the core and the other end under the cutter. Keep

tugging on the cassette, which will come free with a short tail of laminate.

1. Push the

Retaining

Clips (A) to

the Left

2. Slide the

Transfer

Guides (B)

Straight Out

(A)

(B)