User`s manual

Installation
Installation Procedure
980541-003 Rev. A P630i, P640i Card Printer User’s Manual 17
Loading Laminate
Note • In this description of loading laminate, references to the lower Laminate Cassette
apply only to the P640i Printer. The P640i Printer can apply laminate to both surfaces of the
card; the P630i Printer only to the upper surface.
The Laminate (laminating film) is loaded into cassettes to protect it from dirt or other
contaminants.
See the figure below. The “Upper Laminate Cassette”, used on both the P630i and P640i
Printers, has a label with the word “UPPER” and another “label” of a red dot. The “Lower
Laminate Cassette”, used only on the P640i Printer, has a label with the word “LOWER” and
another “label” of a yellow dot.
Removing the Laminate Cassette(s)
Step 1. The Laminate Cassette(s) (Upper only for the P630i Printer; Upper and Lower for the
P640i) are held in position by latch plates. The Upper Cassette is freed by turning its
Latch Plate counter-clockwise to a full vertical position; the Lower Cassette (only
present on the P640i Printer) is freed by turning its Latch Plate clockwise. Then pull
the cassette straight out from its holder.
“Lower
Laminate
Cassette”
(P640i only)
“Upper
Laminate
Cassette”
(P630i and
P640i)