User`s manual

16 P630i, P640i Card Printer User’s Manual 980541-003 Rev. A
Installation
Installation Procedure
Step 6. Re-open the printer cover to inspect the ribbon path for wrinkles and folds. Correct if
necessary, then close the cover. If you do not then hear the ribbon motor advancing
the ribbon, press the RIBBON button.
Installing the Cleaning Cassette
Before being printed, each surface of the card is cleaned by a soft tacky roller that is itself
cleaned periodically by adhesive tape in the Cleaning Cassette. Typically, the roller is cleaned
every 10 cards. The printer driver software allows the card count to be modified.
By cleaning the roller every 10 cards, the Cleaning Cassette contains sufficient tape
for 3,000 cards. This matches the other components of the standard Zebra media pack
(3,000 cards, 3,000 color ribbon images).
Step 1. Open the main cover of the printer.
Step 2. Remove the Cleaning Cassette from its packaging.
Step 3. Remove the protective foil from the Cleaning Cassette. Avoid touching the exposed
tacky surface.
Step 4. Install the Cleaning Cassette on the printer by locating the rectangular pin on the
cleaning mechanism in the receptacle on the cassette. Push the cassette gently home,
ensuring that the internal grooves on the upper spool engage the teeth on the takeup
drive; you will hear a click when it is fully engaged.