User`s manual

Installation
Installation Procedure
980541-003 Rev. A P630i, P640i Card Printer User’s Manual 11
Attach the Output Hopper
Step 1. The Output Hopper is positioned on the right side of the printer to receive the printed
cards. Install the Output Hopper by inserting the tab on the side of the Output Hopper
into the slot on the right side of the printer.
Attach the Ribbon Take-Up Spool
Step 1. Attach the Ribbon Take-Up Spool by sliding it onto the Ribbon Take-Up Spindle and
pressing it straight back until in clicks into place.
Important • Make sure that the Ribbon Take-Up Spool is attached with its “toothed” end
toward the rear of the printer.