Specifications

Installing The Ribbon

• Unroll Enough Ribbon to Span the Distance

Between the Supply and Take-up Spindles and

Loop Under the Print Head

– Align the Supply and Take-up Cores With the Spindles

– At the Same Time Slide Both the Supply and the Take-

up Cores All the Way Onto Their Respective Spindles

–

DO NOT TURN THE SPINDLES BY HAND TO

TAKE

UP THE SLACK

UP THE SLACK, THE PRINTER WILL

AUTOMATICALLY DO THIS WHEN THE PRINT

HEAD IS CLOSED

– Close The Print Head and the Ribbon Will

Automatically Advance to the Proper Alignment

• Yellow Panel