User`s manual

Printer Setup
980515-001 Rev. C P110i & P110m Card Printer User’s Manual 21
4. Close the printer lid and push down until you hear an audible click.
Loading Cards
To help you load, print, and collect cards, the printer has the following items:
Card Feeder
The card feeder is used for loading cards, it can hold up to 100 cards of 30 mils thickness. The
card feeder is located under the card feeder cover of the Printer.
Load cards into card feeder as follows:
1. Open card feeder cover.
2. Slide card guide all the way to the right until it locks in place with an audible click.
3. Remove cellophane wrapper from card stack.
Note • After the lid is closed, the ribbon automatically synchronizes when the printer power
is on.
Caution • DO NOT bend cards or touch print surfaces as this can reduce print quality.
Note • The surface of the cards must remain clean and dust free. Always store cards in an
enclosed container. Ideally, use cards as soon as possible. If cards stick together, carefully
fan or shuffle them.
Note • For Cards with magnetic stripe, refer to Appendix A for loading instructions.
Card
Feeder
Card
Guide