User`s manual

Printer Installation
980515-001 Rev. C P110i & P110m Card Printer User’s Manual 9
4. Insert the power supply plug into the power socket, attach the power cord (120VAC or
230VAC) to the power supply, then plug the power cord in to a grounded electrical socket
of the proper voltage and type.
5. If your printer has only the USB interface, attach the included USB cable to your
computer and the printer.
115 VAC
230 VAC
Caution • Intermittent or unpredictable operation may occur from unsecured
connectors. If damaged, the power cable must be replaced by an exact equivalent. The
socket should always be easily accessible to power off the printer.