Quick Start Guide

10
Introduction
Getting Started
Using the
Printer
Troubleshooting
Contact Us
P4T/RP4T Quick Start Guide
Cleaning the Printer
Caution • To avoid possible personal injury or damage to the printer never insert sharp or pointed objects into the printer mechanism.
Area Cleaning Method Interval
Printhead
Elements
Use a Zebra cleaning pen to clean the print
elements from end to end (the print elements
are located in the thin gray line on the
printhead).
After every  ve rolls of media (or
more often, if needed)
Platen Surface
Rotate the platen roller and clean it
thoroughly with the cleaning pen.
Peeler Bar
Clean thoroughly with the cleaning pen.
As needed
Tear Edge
Exterior Wipe with water-dampened cloth
Interior Brush/air blow. Ensure the Bar Sensor, Gap Sensor
and Label Present Sensor windows and the Media
Support Disks are free of dust.
Printhead
Elements
Label Presence Sensor
Gap
Sensor
Platen Surface
Peeler Bar
Media
Support
Disks
Tear Edge
Bar Sensor