User`s manual

1. Install the replacement Battery
Compartment Cover Assembly. Ensure
the slot on the Latch is parallel to the long
axis of the printer and insert the three tabs
on the Door into the printer and lower the
cover onto the printer.
2. Ensure the battery leads will not be
pinched when the Battery Door is secured
in place.
3. Use a coin or tool CF18330-1 to
rotate the Battery Compartment lock 1/4
turn clockwise to lock the Battery Door
Assembly into place.
RMAN-MZS-002 • MZ Series Repair Procedures • Sect.2-18 •