User guide

MZ™Series

Quick Start Guide

Printer Controls

Section Continues

Introduction

Getting Started

Using the

Printer

Troubleshooting

Accessories

Power Button

Press until Power Light turns on, then

release. Press again to turn unit off

Feed Button

Press to advance the media.

Release to stop.

Communication Light (Blue)

When lit steadily indicates a wireless

communications link is established, when

blinking indicates data transmission.

Charge Light (Green/Amber)

Green indicates the battery

fully charged. Amber indicates

the battery is less than 90%

charged.

IrDA

Window

This area must be within the line of sight

of any other IrDA enabled device for IR

communications to occur.

Media Status Light (Amber)

When off Indicates normal operation,

blinking indicates either no media or

that the media compartment is open

Power Light (Green)

Indicates power status and battery condition. A steadily

lit indicator means the battery has more than a 30%

charge remaining. A blinking indicator means the

battery has less than a 30% charge remaining.