User guide
Table Of Contents
- Printer Operation
- Maintenance and Troubleshooting
- Appendix A – Printer Configuration
- Appendix B – Using the Serial/USB Interface
- Appendix C – Using the IrDA® Interface
- Appendix D – Using the Bluetooth® Interface
- Appendix E – Using the Wi-Fi® Interface
- Appendix F – Additional Setup Features
- Appendix G – Printer Setup Menu Summary
- Appendix H – Mobile Setup Utility
- Appendix I – Control Panel Setup
- Appendix J - Power Considerations
- Appendix K – Print & Font Samples
- Appendix L – Specifications
- Glossary of Terms
Appendix I – Control Panel Setup
Control Panel Setup allows the user to configure most features of the DP-550. Some items may require using
the Dascom Mobile Setup Utility described in Appendix H.
The list below describes where in this manual you may find detailed information for each of the setup menus.
Each section begins with a summary table which describes which setup method(s) may be used.
Menu Appendix Page
Interface – Serial/USB Appendix B 27
Interface – IrDA Appendix C 31
Interface – Bluetooth Appendix D 33
Interface – Wi-Fi Appendix E 37
Image Management Appendix A 20
Device Settings Appendix A 22
Advanced Appendix A 24
Control Panel Setup Basics
Power Indicator
LCD Display
Power Button
Figure 14 - DP-550 Control Panel
When in Setup, the top line of the LCD Display shows the name of the menu or the name of an “item” within
the menu. The bottom line of the display shows the current value that is set to be used for the item displayed on
the top line.
The Setup menus operate as a “What You See Is What You Get” system. This means that whenever you view
or change any of the menu choices available, the value showing when you proceed to the next item or exit Setup
is the value the printer will use after you exit Setup. Note that when exiting Setup, you may elect to discard any
changes.
Enter Button
Advance Button
Increment Button
49