User guide
Table Of Contents
- Printer Operation
- Maintenance and Troubleshooting
- Appendix A – Printer Configuration
- Appendix B – Using the Serial/USB Interface
- Appendix C – Using the IrDA® Interface
- Appendix D – Using the Bluetooth® Interface
- Appendix E – Using the Wi-Fi® Interface
- Appendix F – Additional Setup Features
- Appendix G – Printer Setup Menu Summary
- Appendix H – Mobile Setup Utility
- Appendix I – Control Panel Setup
- Appendix J - Power Considerations
- Appendix K – Print & Font Samples
- Appendix L – Specifications
- Glossary of Terms
Printer Operation
Refer to
Figure 4 and locate the movable paper support. Move the support by pressing in the area indicated by
the arrow and then locate the paper between the two supports and release the movable support.
Note: Make sure the roll spins freely on the paper supports.
Movable Support
Fixed
Support
Figure 4 - Paper Support
Refer to
Figure 5 and unroll enough paper to allow it to lay through the print head as shown, and close the paper
door.
Figure 5 - Paper Laying Through Print Head
If the printer is turned on, you may now press the
Paper Feed Button to advance the paper a few inches and
then tear it off in preparation for printing.
4