Installation Guide
Table Of Contents
- Terms of Use
- Contents
- About This Document
- Hardware Specifications and Installation
- LozierĀ® Shelves
- MB1000 Beacon: MPACT-T1B20-000-WR
- MB1000 Beacon: MPACT-T1B10-000-WR
- MPACT-MB2000-01-WR, MPACT-MB1000-01-WR, MPACT-MB2001-01-WR, MPACT-SB2000-01-WR
- USB Beacon: MPACT-MB3000-01-WR
- Beacon Part Numbers: MPACT-MB4000-01-WR and MPACT-MB4001-01-WR
- Beacon: MPACT-MB1000-01-WR and MPACT-SB1100-01-WR
- Fixed IoT Bridge (hub): MB5000-01-WR
- Mobile IoT Bridge (badge): MB6000-01-WR
- Cradle Charger: MPACT-MB6000-CHRGR
- Troubleshooting
Hardware Specifications and Installation
21
Figure 26 MPACT-SB-1100-01-WR Beacon
NOTE: MPACT-SB1100-01-WR mounted to the optional MPACT-MB1001-01-ACC wrist mount
accessory.
Operating Modes
Refer to the following for operating modes for MB1000-01-WR asset beacon operating modes:
The MPACT-MB1000-01-WR is delivered in shipping mode. To initiate beacon operation, press the button
three times quickly (within 2 seconds), if unsuccessful, wait 5 seconds and repeat. The LED flashes
several times and the beacon begins to broadcast. Using the table below, hold the button for the length of
time shown to change modes. The LED displays a different light pattern depending on the mode it is
entering.
Cleaning
Cleaning frequency is discretionary in respect to the environments the BLE devices are deployed. They
may be cleaned as frequently as required.
Mode Definition
Sleep The beacon is not transmitting or accepting client connections.
Configuration The beacon accepts connections from clients. Clients can configure the device
when connected.
Broadcast The beacon is transmitting packets that conform to one of the supported
beacon formats (iBeacon, MPact, Battery Save and SecureCast).
Current
Operation Mode /
Button Press
Sleep Configuration Broadcast LED Behavior
0-2 seconds No action No action No action
2+ -5 Moves to
Broadcast mode
Moves to
Broadcast mode
Moves to
Broadcast mode
Slow Flash
5+ - 10 Moves to
Configuration
mode
Moves to
Configuration
mode
Moves to
Configuration
mode
Fast Flash
+ 10 Moves to Sleep
mode
Moves to Sleep
mode
Moves to Sleep
mode
Solid LED