Installation Guide
Table Of Contents
- Terms of Use
- Contents
- About This Document
- Hardware Specifications and Installation
- Lozier® Shelves
- MB1000 Beacon: MPACT-T1B20-000-WR
- MB1000 Beacon: MPACT-T1B10-000-WR
- MPACT-MB2000-01-WR, MPACT-MB1000-01-WR, MPACT-MB2001-01-WR, MPACT-SB2000-01-WR
- USB Beacon: MPACT-MB3000-01-WR
- Beacon Part Numbers: MPACT-MB4000-01-WR and MPACT-MB4001-01-WR
- Beacon: MPACT-MB1000-01-WR and MPACT-SB1100-01-WR
- Fixed IoT Bridge (hub): MB5000-01-WR
- Mobile IoT Bridge (badge): MB6000-01-WR
- Cradle Charger: MPACT-MB6000-CHRGR
- Troubleshooting
Hardware Specifications and Installation
17
The barcode label should face up toward the ceiling and the smooth front of the beacon should face out to
where the mobile client is expected to engage.
Beacon: MPACT-MB1000-01-WR and MPACT-SB1100-01-WR
The MPACT-MB1000-01-WR and MPACT-SB1100-01-WR beacon is a small beacon designed to be
affixed to assets. The beacon and the optional mounting accessory are used to attach the asset beacon to
an object lacking a flat mounting surface.
On the side of the asset beacon is a switch used to place the device in different operating modes.
Figure 20 Beacon and Mounting Accessory
Mode Shipping Sleep Configuration Broadcast LED Behavior
0-2 seconds No action No action No action No action
2+ -7 Broadcast Broadcast Broadcast Broadcast Solid light
7+ - 12 Move to
configuration
Remain in
configuration
Move to
configuration
Slow flash when
button flashes
300 ms on /
300ms off.
+ 12 Sleep Sleep Sleep Fast flash –
100ms /on & off