Installation Guide
Table Of Contents
- Terms of Use
- Contents
- About This Document
- Hardware Specifications and Installation
- Lozier® Shelves
- MB1000 Beacon: MPACT-T1B20-000-WR
- MB1000 Beacon: MPACT-T1B10-000-WR
- MPACT-MB2000-01-WR, MPACT-MB1000-01-WR, MPACT-MB2001-01-WR, MPACT-SB2000-01-WR
- USB Beacon: MPACT-MB3000-01-WR
- Beacon Part Numbers: MPACT-MB4000-01-WR and MPACT-MB4001-01-WR
- Beacon: MPACT-MB1000-01-WR and MPACT-SB1100-01-WR
- Fixed IoT Bridge (hub): MB5000-01-WR
- Mobile IoT Bridge (badge): MB6000-01-WR
- Cradle Charger: MPACT-MB6000-CHRGR
- Troubleshooting
Hardware Specifications and Installation
13
Figure 14 Open Battery Enclosure
4. Close the battery enclosure, ensuring the clip is secure.
Battery Disposal
• Always dispose of batteries according to local laws.
• NEVER dispose of batteries in fire as they may explode.
• Where available, please recycle to reduce the impact on our environment.
USB Beacon: MPACT-MB3000-01-WR
A USB powered interface is required to power the USB Beacon. No additional hardware is required.
Installing
To activate a MPACT-MB3000-01-WR model beacon:
1. Insert the beacon into any standard USB power source—the beacon moves into connect mode
automatically after insertion.
Figure 15 USB Style Beacon