Installation Guide

Hardware Specifications and Installation
9
Figure 8 Indoor Style Beacon
The MPACT-SB2000-01-WR is a unique device. It operates as a BLE beacon but also captures and
broadcasts (using BLE) the information of other nearby Zebra BLE beacons. It is packaged the same as
other Zebra beacons including two AA batteries.
Figure 9 shows the basic operation of the SB2000.
Figure 9 SB2000 Basic Operation
The SB2000 is configures via the Superbeacon Toolbox application which is available from Zebra product
line management. The configuration of the product is done with the toolbox application and related settings
in the Zebra AB5000. Refer to the JSON Schema for Receiver Operations document for more information.
Mounting and Installing
Adhere to the following prerequisites when mounting an MPACT-MB2000-01-WR,
MPACT-MB2001-01-WR, or MPACT-SB2000-01-WR model beacon:
Do not install the cover on the unit until the beacon has been initialized and configuration verified.
Ensure the planned installation location matches your physical deployment plans.
Beacon mounting heights my vary by deployment but should be mounted 2 meters or lower from the
supporting surface.
Ensure the intended deployment location has good Wi-Fi coverage.