Spec Sheet

FACT SHEET
BLUETOOTH BEACONS
  3
MB4000 OUTDOOR BEACON
This industrial beacon is sealed against the environment, operates
over an extreme temperature range and is ruggedized for use in
harsh industrial environments. Powerful batteries ensure a long
life controlled via a simple touchpad on/off switch.
Wireless Bluetooth 4.1 (Bluetooth Low Energy Technology)
Modes Battery Save, iBeacon and MPact
Beacon Interval Configurable in 100ms intervals
Dimensions 7” x 1 7/8” x 1”
Battery Non-replaceable Lithium Magnesium batteries
Transmit Power -10dBm to -31dBm (EIRP) Configurable in 1dB steps
Antenna Type Directional Antenna with 160 Degree Beamwidth /
Downtilt
Operating Temp. -40° F to 140° F / -40° C to 60° C
Estimated
Operational Life
Battery Save mode: about 5 yr @ 200ms
iBeacon mode: about 3 yr @ 100ms
MPact mode: about 4 yr @ 200ms
Secure Cast about 4 yr @ 200ms
Weight 143 gms
Bluetooth
Frequency
2.4GHz
Bluetooth Security 128 bit AES
LED Single LED with blink patterns representing
operational modes
On / Off switch Touchpad controller with LED indicator
Environ. Resistance IP67 (waterproof), UV resistant, and shock resistant)
Installation Options Sticky Tape, Screws
Touchpad Controller
Temperature
0°C to 60°C
CLIENT DEVICE SUPPORT WITH SDK
The SDK includes drivers, APIs and a sample application. This application is
available from Zebra upon request
• Apple® devices running iOS9.0 or later
• Android™ devices that support Bluetooth Smart running Android 7.0 or later
MPACT TOOLBOX
Beacons come configured in MPact mode. This application is required to
change/customize beacon transmit power, transmit interval, operating mode
and other configuration settings. This application is available from Zebra
upon request.
Hardware For iOS: versions 7.1 or later
For Android: version 5.0 or later
MB2001 INDOOR BEACON
These ultra-low RF transmission power beacons have 100 times
lower RF transmission power than typical Bluethooth® low energy
beacons. With replaceable AA batteries these beacons are optimized as
location beacons in asset tracking solutions anywhere locate accuracy in
dense deployments is important.
Wireless Bluetooth 4.1 (Bluetooth Low Energy Technology)
Modes Battery Save, iBeacon and MPact
Beacon Interval Configurable 100ms to 10 sec
Dimensions 3 .12” x 1.76” x 0.96
Battery Two replaceable, standard AA batteries
Transmit Power -25 dBm to -43 dBm Configurable in 1dB steps
Antenna Type Directional antenna with 120° beamwidth
Operating Temp. 32° F to 104° F/0° C to 40° C
Estimated
Operational Life
2 years with a 200ms beacon interval
Weight 86 g
Bluetooth
Frequency
2.4GHz
Bluetooth Security 128bit AES
LED Yes, with blink patterns representing various modes
of operation
On/Off Switch Yes
Environ. Resistance Indoor environment
Installation Options Sticky Tape, Secure Mounting brackets, Tie Wrap
Cleaning Tested for a lifetime of cleaning with 15 common
cleaning agents *
Regulatory EMI/EMC (FCC), safety (UL)
MB3000/MB3200 INDOOR BEACONS
The USB beacon is ideal wherever you have the option to provide
power via a USB port or a standard AC plug (requires a USB adaptor),
such as a retail kiosk computer, or USB wall socket — there is no
battery to monitor or replace.
Wireless Bluetooth 4.0 (Bluetooth Low Energy Technology)
Modes iBeacon and MPact
Beacon Interval Configurable in 100ms intervals
Dimensions 0.57” x 0.27” x . 0.80”
Battery Powered by standard USB connection (Type-A)
Transmit Power 4 dBm to -23 dBm (EIRP) Configurable in 1dB steps
Antenna Type OmniDirectional Antenna
Operating Temp. 32° F to 104° F / 0° C to 40° C
Estimated
Operational Life
5 years
Weight 2g
Bluetooth
Frequency
2.4GHz
Bluetooth Security 128 bit AES
LED None
On / Off switch Insert into USB port to power on
Remove from USB port to power off
Environ. Resistance Indoor environment
Installation Options USB port
Bluetooth Beacon Specifications (continued)