Datasheet
Mesh networking
Allows wireless extension
of existing wired or wireless
networks in remote or
outdoor locations
802.11i, WPA2 and
IPSec encryption
End-to-end government-class
wired and wireless security
Wi-Fi Multimedia (WMM™),
Quality of Service (QoS)
and voice prioritization
Superior performance for
demanding mission critical
applications, including voice
and video
MU Rate
Limiting
Allows client-based control
of bandwidth, preventing any
single user from impacting
network availability
W
AN and LAN Ethernet ports
Single device solution for both
wired and wireless networking
Java™ web-based graphical
u
ser interface TLS 1.0; SNMPv3;
command line inter
face (CLI)
Flexible management options;
easy-to-use “anytime, anywhere”
management
Integrated VPN
Cost-effective secure
site-to-site communications
D
FS compliance
Increased throughput through
greater channel availability in the
5 GHz bands
Operating bands:
FCC EU Japan
2.412 to 2.462 GHz 2.412 to 2.472 GHz 2.412 to 2.484GHz
5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 4.900 to 5.000 GHz
5.250 to 5.350 (UNII -2) 5.250 to 5.350 GHz 5.150 to 5.250 GHz (W52)
5.470 to 5.725 (UNII -3) 5.470 to 5.725 GHz 5.250 to 5.350 GHz (W53)
5.725 to 5.850 (ISM) (Country Specific) 5.470 to 5.725 GHz (W56)
Regulatory
Product safety
certifications:
UL / cUL 60950-1, IEC / EN60950-1, UL2043, RoHS
Radio approvals: FCC (USA), Industry Canada, CE (Europe), TELEC
(Japan), China, Korea, Australia
Part Numbers
AP-7131N-44040-FGR FIPS 140-2 Level 2 certified Dual Radio
802.11a/b/g Adaptive Services Access
Point (US only)
AP-7131N-44040-FWW FIPS 140-2 Level 2 certified Dual Radio
802.11a/b/g Adaptive Services Access
Point (worldwide, not for US)
AP-7131N-44040-FIL FIPS 140-2 Level 2 certified Dual Radio
802.11a/b/g Adaptive Services Access
Point (Israel)
AP-7131N-66040-FGR FIPS 140-2 Level 2 certified Dual Radio
802.11n Adaptive Services Access Point
(US only)
AP-7131N-66040-FWW FIPS 140-2 Level 2 certified Dual Radio
802.11n Adaptive Services Access Point
(worldwide, not for US)
AP-7131N-66040-FIL FIPS 140-2 Level 2 certified Dual Radio 802.11n
Adaptive Services Access Point (Israel)
50-14000-247R AP-7131-GR Power Supply
AP-PSBIAS-1P3-AFR Single Port High Power 802.3at (Draft)
Power Injector
ML-2452-PTA2M3X3-1* Façade with 6 element antenna Module
ML-2452-APA2-01* Indoor Dipole 3dBi Antenna
ML-2452-PTA3M3-036* 3 Port MIMO Antenna
ML-5299-BYGA15-012* Yagi 4.9-5.8GHz Antenna
Operating altitude: 8000 ft./2438 m @ 82°F/28°C
Storage altitude: 15000 ft./4572 m @ 53°F/12°C
Electrostatic discharge: 15kV air, 8kV contact
Power Specifications
Operating voltage: 36-57VDC
Operating current: Not to exceed 600mA @ 48VDC
Integrated PoE support: 802.3af support for dual radios, 802.3at (draft)
Networking Specifications
Layer 2 and Layer 3: Layer 3 routing, 802.1q, DynDNS, DHCP
server/client and PPPoE
Security: Stateful Firewall, IP filtering, NAT, 802.1x,
802.11i, WPA2, Triple-Methodology Rogue
Detection: 24x7 dual-band WIPS sensing,
MU-assisted, on-board IDS and secure guest
access (HotSpot)
Quality of Service (QoS): WMM, WMM-UAPSD, 802.1p, Diffserv and TOS
Radio Specifications
Wireless medium: Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing
(OFDM) and Spatial multiplexing (MIMO)
Network standards: IEEE 802.11a/b/g/n (Draft 2.0), 802.11d and
802.11i WPA2, WMM and WMM-UAPSD
Data rates supported: 802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48,
and 54Mbps
802.11a: 6,9,12,18,24,36,48, and 54Mbps
802.11n: MCS 0-15 up to 300Mbps
Operating channels: All channels from 4920 MHz to 5825 MHz
Chan 1-13 (2412-2472 MHz)
Chan 14 (2484 MHz) Japan only
Actual operating frequencies depend on
regulatory rules and certification agency
Maximum available
transmit power setting:
23dBm (dependent on regulatory rules and
certification agency)
Transmit power
adjustment:
1dB increments
Antenna configuration: 3
x3 MIMO (transmit/receive on all three antennas)
AP-7131-GR Specifications (continued)
4
Continued on back...
* For additional details on antennas refer to the: Enterprise
Wireless LAN Antenna Guide.