Datasheet

System Configuration
4-3
2. Configure the AP-5131 System Settings field to assign a system name and location, set the
country of operation and view device version information.
System Name Specify a device name for the AP-5131. Symbol recommends
selecting a name serving as a reminder of the user base the
AP-5131 supports (engineering, retail, etc.).
System Location Enter the location of the
AP-5131. The System Location
parameter acts as a reminder of where the AP can be found. Use
the System Name field as a specific identifier of device
location. Use the System Name and System Location fields
together to optionally define the AP name by the radio coverage
it supports and specific physical location. For example, “second
floor engineering”
Admin Email Address Specify the AP administrator's email address.
Country The
AP-5131 prompts the user for the correct country code
after the first login. A warning message also displays stating
that an incorrect country setting will lead to an illegal use of the
AP-5131. Use the pull-down menu to select the country of
operation. Selecting the correct country is extremely important.
Each country has its own regulatory restrictions concerning
electromagnetic emissions (channel range) and the maximum
RF signal strength transmitted. To ensure compliance with
national and local laws, be sure to set the Country field
correctly.
If using the
AP-5131 configuration file, CLI or MIB to configure
the
AP-5131s country code, see Country Codes on page A-5.
AP-5131 Version The displayed number is the current version of the AP-5131
device firmware. Use this information to determine if the AP is
running the most recent firmware available from Symbol. Use
the Firmware Update screen to keep the AP’s firmware up to
date. For more information, see Updating Device Firmware on
page 4-34.
System Uptime Displays the current uptime of the
AP-5131 defined in the
System Name field. System Uptime is the cumulative time since
the
AP-5131 was last rebooted or lost power.