Datasheet

AP-5131 Access Point Product Reference Guide
2-4
2.3 Requirements
The minimum installation requirements for a single-cell, peer-to-peer network:
• AP-5131 (either the dual or single radio model)
• AP-5131 48 Volt Power Supply (Part No. 50-24000-050) or Symbol power injector
(Part No. AP-PSBIAS-T-1P-AF)
• a power outlet
• Dual-Band Antennae (Part No. ML-2452-APA2-01)
.
2.4 Placement of the AP-5131
For optimal performance, install the AP-5131 away from transformers, heavy-duty motors, fluorescent
lights, microwave ovens, refrigerators and other industrial equipment. Signal loss can occur when
metal, concrete, walls or floors block transmission. Install the AP-5131 in open areas or add access
points as needed to improve coverage.
Antenna coverage is analogous to lighting. Users might find an area lit from far away to be not bright
enough. An area lit sharply might minimize coverage and create dark areas. Uniform antenna
placement in an area (like even placement of a light bulb) provides even, efficient coverage.
Place the AP-5131 using the following guidelines:
• Install the AP-5131 at an ideal height of 10 feet from the ground.
• Orient the AP-5131 antennae vertically for best reception.
• Point the AP-5131 antenna(s) downward if attaching to the ceiling.
CAUTION Using an antenna other than the Dual-Band Antenna (Part No. ML-
2452-APA2-01) could render the AP-5131’s Rogue AP Detector Mode
feature inoperable. Contact your Symbol sales associate for specific
information.
NOTE The AP-5131 optimally uses 2 antennae for the single-radio model and 4
antennae for the dual-radio model.
!