Datasheet

AP-5131 Access Point Product Reference Guide8-174
AP5131>admin(system.test)> set
Description:
Defines the parameters of an AP-5131 system test. These commands are recommended for qualified technicians only.
Syntax:
set flow <mode> enable/disable Enables or disables flow control for the AP-5131.
hbt <mode> enable/disable Enables or disables heartbeat mode for the AP-5131.
wd <mode> enable/disable Enables or disables the wireless disable val option for the AP-5131.
pmd <mode> enable/disable Defines a fix psp more data enable val settings as enabled or disabled.
rs <mode> enable/disable Enables or disables the AP-5131 rate scale test setting.
int1 <value> Defines integer 1. For example 0x1234.
int2 <value> Defines integer 2. For example 0x1234.
int3 <value> Defines integer 3. For example 0x1234.
int <value> Defines integer 4. For example 0x1234.
str1 <value> String is 1 through 39 characters in length.
str2 <value> String is 1 through 39 characters in length.
str3 <value> String is 1 through 39 characters in length.
str4 <value> String is 1 through 39 characters in length.